NANJING LESUN SCREW CO.,LTD

The Key Points of Starting the Extruder

When using the extruder, it is necessary to frequently check whether there is foreign matter in the barrel which such as sand or metal powder is not allowed to be mixed into the raw materials. Check the lubricating oil parts of the extruder, fill the lubricating oil, and the temperature of the bearing parts should not exceed 50℃ when working. The extruder barrel should have enough constant temperature heating time, and it is not allowed to start production under the condition of lowering the raw material temperature. When the screw is working, start at a low speed and work for a period of time, and then increase the screw speed after everything is normal. If there is no raw material in the barrel, the screw is not allowed to run idly for a long time. Keep an eye on the swing change of the ammeter pointer of the screw drive motor. If the motor is overloaded for a long time, stop immediately, find the cause of the fault, and continue production after troubleshooting. After the extruder barrel is heated to the process temperature for the first time, tighten the fixing bolts connecting the barrel and the base again. When installing the mold and the screw, the contact surface of the parts should be clean and free of any foreign matter. Fastening bolts should be coated with a layer of silicone oil to facilitate the disassembly of parts. When disassembling the extruder, it is not allowed to hit the surface of the part with a heavy hammer. If necessary, pad and hit the hardwood with a hammer to disassemble the part.


When cleaning the residual material on the barrel, screw and mold of the extruder, only bamboo or copper knife can be used to brush the material, and steel knife is not allowed to scrape the sticky material, let alone the fire.

  • Correct Maintenance Tips for Twin Screws

    Correct Maintenance Tips for Twin Screws

    November 24, 2021When the material is processed, it is necessary to make the processed material obtain the energy required for the physical change and part of the chemical change. The twin-screw extruder is one of the...view
  • Specifications and Characteristics of Extruder Screw Barrel

    Specifications and Characteristics of Extruder Screw Barrel

    April 27, 2022The extruder screw barrel is the molding processing method with the most varieties, the most changes, the high productivity, the strong adaptability, wide range of uses and the largest proportion of o...view
  • Conditions and Methods of Using Barrel Screw

    Conditions and Methods of Using Barrel Screw

    May 26, 2022Extruder barrel heating is widely used resistance heating, and thermocouples are used to achieve segmented temperature control and side detection. Resistance heating is the use of resistance to genera...view
  • Heating and Cooling of the Extruder Screw Barrel

    Heating and Cooling of the Extruder Screw Barrel

    June 8, 20211. Heating method of the screw and barrel of extruderThe heating of the machine adopts the way of resistance heating, and thermocouples are used for segmented temperature control and side detection. R...view
top Inquiry